Ford E-Series Swivel Seat Base

(34 reviews) Write a Review

The Ford Swivel Seat Base allows you to rotate your seat 180 degrees to face the rear of the van.* 

The Ford Swivel Seat Base does not work with a power drivers seat.

The Driver's side Ford Swivel Seat Base does not work with a 4x4 van due to the location of the 4x4 shift levers.  The passenger seat still works fine.

The swivel seats work for E-Series vans model year 1997-2014. E-Series cutaways 1997-present. You may have to move sensors wires under the seat for install. Professional installation recommended but not required. 

*Seat needs to be facing forward while van is in motion.

Ships UPS* 


30.00 LBS
$25.00 (Fixed Shipping Cost)

34 Reviews Hide Reviews Show Reviews

  • 5
    Fantastic product

    Posted by Luke Habig on 17th Jun 2018

    This swivel seat base works as advertised, is easily installed, and a great addition to my campervan. Also, customer service was great and shipping was extremely fast.

  • 5
    Ford E350 XLT Swivel Seat Base

    Posted by Simon on 15th Jun 2018

    Best decision I made to compliment my van. Now I can spin the seat around and it opens up the "living room" space where I can just lay back and watch my television or not need to exit the van in rain or what not!

  • 5
    Ford E-Series Swivel Seat Base

    Posted by Henry on 24th Apr 2018

    Installed in my Class C Ford E-450. Perfect fit. Took less than 1 hour.

  • 5
    E450 swivel seat bases

    Posted by Oscar Ramsey on 15th Apr 2018

    Good quality product. Fits well, easy install.
    Might think about shipping containment. Maybe bolt seat base to plywood that fits dimensions of box to restrict shifting in travel. Ours was protruding through box but was not damaged.
    Might be a little expensive but consider lawyers and insurance company probably take a third.

  • 4
    Excellent upgrade!

    Posted by Chris on 11th Dec 2017

    Simple enough to install and really opens up a lot of room when the seat is turned around. It is a tight fit between the door jamb and the seat as you pivot and rubs a tad but it works. Solid base when going down the road.

  • 5
    Perfect fit!

    Posted by Catherine Cummins on 29th Nov 2017

    We installed this seat on the passenger side of a F350 cab that had been manufactured as a Fraserway Adventurer 24' motorhome. We had to build up the base slightly to accommodate the change in floor levels, but it was a quick, easy install. Thank you, Sportsmobile!

  • 5
    Great product

    Posted by Sallie Lippe on 25th Oct 2017

    Shipped quickly, easy to install with a few tools, simple to maneuver - a nice enhancement opening up space inside our van.

  • 5
    Works great and easy install

    Posted by Jerry on 22nd Jun 2017

    I've been looking for a product like this for some time. I installed it in about 20 minutes and it works really well. The arm rest on my passenger seat does interfere with the door somewhat, but does not keep the chair from turning completely around. Most of the time just for convenience, I will probably just use the seat turned at about 150 degrees rather than 180, works better that way in our motorhome. Great product, seat is still very sturdy.

  • 3
    Damaged in shipping

    Posted by Michael Azevedo on 6th Apr 2017

    Product arrived damaged. You would figure for spending $300 on a single metal mount, and having paid ~$25 for shipping, Sportsmobile would care enough to put, you know a wrap or two of bubble around the mount inside the box. I guess not. Instead it shipped in just a flimsy cardboard box with not a single thing put inside to protect the product. Surprised it was damaged?

    Mount does what it's supposed to. Overpriced in my opinion.

Sportsmobile started in 1961 in El Paso, TX and then later relocated to Huntington, IN. It has since expanded to Austin, TX, Fresno, CA, and Reno, NV. We have been specializing in the conversion of camper vans for five decades now.

Interested in our Sportsmobile Conversion? Click Here

Contact Us