The Ford Swivel Seat Base allows you to rotate your seat 180 degrees to face the rear of the van.*
The Ford Swivel Seat Base does not work with a power drivers seat.
The Driver's side Ford Swivel Seat Base does not work with a 4x4 van due to the location of the 4x4 shift levers. The passenger seat still works fine.
The swivel seats work for E-Series vans model year 1997-2014.
*Seat needs to be facing forward while van is in motion.
Showing reviews 1-10 of 15 | Next
Posted by Moose on 17th Jan 2017
Expecting plates that were truly made for an E350. However there are airbag brains that sit under each seat. The box that goes over the brain on the drivers was not deep enough (1.5" spacing needed) and passenger did not have a box at all so that needed 2". Also needs a big enough hole near center of the pedestal so that the line (and coupling) feeding into the brain from the floor can move around with ease. I must undo the coupling to swivel the passenger base. Not moving when that occurs so not that big of a deal. I have a 2008 E350.
Posted by Unknown on 9th Jan 2017
Product came in a busted open box with zero packaging and no installation instructions.
Posted by Lyle Bond on 10th Jun 2016
The hardest part of installation was removal of carpet pad so I could stock bolts as they weren't long enough without the pad removal. Works as advertised very happy with my purchase .Thanks
Posted by SK POD on 28th Apr 2016
We installed this in our 2015 motorhome on the E450 chassis. Installation was pretty easy, all done in less than an hour. I'm very satisfied with my purchase and with the quick delivery from Sportsmobile West.
Posted by Unknown on 11th Apr 2016
This item was as advertised. Installation was simple. It took about 90 minutes to complete.
It worked flawlessly and is extremely well made.
It really opened up the front of the coach and added usable living space with the addition of another seat while camped.
It did not come with any instructions and it would have been a plus to know ahead of time what tools were needed.
I would recommend this product to anyone with a Ford Econoline Chassis.
It really should be an option offered by RV manufacturers.
Posted by Unknown on 15th Mar 2016
The swivel mechanism works flawlessly and is a nice solid seat that does not wiggle
Posted by Unknown on 24th Feb 2016
This swivel base fit my 2009 Ford e250 cargo van passenger side seat and floor perfectly,it's heavy duty and when you turn if to face aft it will recline some too .
Posted by Ramee on 15th Dec 2015
I purchased this unit after reviewing the schematic they sent out. Hole alignment on the bottom and the seat were exact! Installed in 15 minutes, and seat rotation was easy. I have to review the seat belt connector, but can work that out to manage the rotation. Am very pleased!
Posted by Joe on 25th Sep 2015
This was way easier than I thought on my 2011 E350. Hole line up perfectly, seat installs easy. On the passenger van, i did have to cut out the carpet under the base to get it to rest low enough, but that only added about 5 minutes.
Posted by John Barkley on 29th Aug 2015
After searching for a "drop in" pedestal for passenger side swivel pedestal for '02 econoline (with many dead-end, unanswered questions from other vendors) Sportsmobile responded in less than 24 hours with engineering drawings of pedestal.
Replacement time from unboxing to completed installation was less than 1 hour. Only issues is that I will have to drill hole in base plate for SRS sensor, and same for CD changer that was mounted under seat.
All in all a simple (if EXPENSIVE) drop-in replacement. All in all, worth it).
Showing reviews 1-10 of 15 | Next
All prices are in USD.